Study of the influence ultrafiltration parameters

GENERAL SPECIFICATIONS

• 60L SS feeding tank, observation of the level by external
• Feeding pump
• Centrifugal pump
• SS exchanger
• Ultrafiltration module : SS carter, with clamp connection DN20 retentate and DN15  permeate.
• Ceramic membrane: 50 KD.
• Ceramic membrane: 0,45 μ (fruit juice).
• Retentate circuit.
• SS retentate storage tank inox, 40L.
• SS permeate storage tank, 20L.
• Water circuit.

Instrumentation

• Temperature probe Pt100Ω.
• Flowmeter with dial display
• Electromagnetic flowmeter.
• 3 Manometer.

Dim : 170 x 80 x 215 cm - 230 kg
SS tubular framework 40 x 40mm

[print-me target="#page"]

L’article Ultrafiltration for food processing est apparu en premier sur Pignat.com.

Bioreactor in batch mode

GENERAL SPECIFICATIONS

• 10 L stainless steel tank,double jacket.
• Upper lid, electro-polished stainless steel 304,vapor injection for sterilization, cleaning hole,
  one exhaust gas equipped with a rupture disk, 3 quick fitting connections for: reagent, compressed air and substrate injection.
• Stirring with variator and display of fluid level, Electro polished shaft equipped with two stainless steel 304
  Rushton turbine. Anti foam system on surface, 4 removable baffles.
• Compressed air circuit,Stainless steel filter, sterilizable by vapor injection. Sparger for air introduction in the medium
• Vapor circuit
  General isolating valve, relief valve for low pressure, general
  feeding solenoid valve, pressure gauge, and controlling vapor
  valve. Three ways valve to select either fermentation, or sterilization.Vapor circuitry for the sterilization, three way valve.
• Cold water circuit
• Vapor/ Water mixer.

Instrumentation

• Pt 100 Ω temperature probe.
• Pt 100 Ω temperature probe. double measurement.
• One O2 electrode (sterilizable in situ).
• One pH electrode (sterilizable in situ).
• One Bourdon pressure gauge and oil bath.
• Float flow meter PCV 2.
• Float flow meter Glass.

Dim : 180 x 80 x 180 cm - 150kg
SS tubular framework 40 x 40mm

[print-me target="#page"]

L’article 10L stainless steel fermenter est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• PE feeding flask, 2 L.
• Peristaltic pump
• Compressed air injection system
• System is completely dismountable in order to ease cleaning.
• Hot air introduction system
• Glass atomisation chamber
• Glass cyclone
• Glass storage flask, 500 mL.

Dim : 55 x 60 x 120 cm - 60 kg
Unit to put on table

[print-me target="#page"]

L’article Spray dryer est apparu en premier sur Pignat.com.

Identifications of operating conditions in industrial environment

GENERAL SPECIFICATIONS

• Jacketed feeding tank, SS, 8 L, removable SS flat lid.
• Volumetric pump.
• Mineral ultrafiltration module: tubular module, SS carter, ceramic membrane.
• 4 SS food diaphragm valves, assembly by clamp connections, SS piping.

Instrumentation

• 2 manometers mounted on separator.
• Digital thermometer.

Dim (with framework): 80 x 65 x 175 cm - 80 kg
Aluminum profile framework

[print-me target="#page"]

L’article Ultrafiltration for food processing est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• Air blower, 0 to 350 m3/h, variable speed drive for flow control.
• Air heating device, with safety thermostat at 90°C and low flow rate safety detector.
• Air diffuser, stainless steel fritted.
• Glass fluidization chamber, product feeding and sampling taps.
• Differential pressure measurement, piezometric tube.
• Particle filter at air outlet.

Instrumentation

• Temperature probes Pt 100 Ω.
• 2 coupled temperature / relative humidity probes.
• One air speed transmitter with hot wire sensor.
• Vacuum gauge.
• Float rotameter.

Dim : 120 x 80 x 200 cm - 150 kg

SS tubular framework 40 x 40mm

[print-me target="#page"]

L’article Fluidized bed drying est apparu en premier sur Pignat.com.

Dim : L x l x H = 30 x 30 x 59 cm.

[print-me target="#page"]

L’article Crown capper est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• Buffer tank, stainless steel, 30 L, insulated, with supply valve and drain valve, high level detector.
• Four heads, stainless steel, articulated, with adjustable filling level.
• Bottles support shelf, height
  adjustable, draining nozzle.

Dim : 120 x 50 x 200 cm - 75 kg

[print-me target="#page"]

L’article Bottle filler est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• Stainless steel tank, 100 L, on swivel casters (two with brake).
• Two nozzles for easy connection.

Ø x H = 60 x 100 cm

[print-me target="#page"]

L’article SS tank est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• SS Feeding tank, 50 L.
• Feeding centrifugal pump.
• Pump discharge circuit.
• 3 to 21 filtration plates, polymer. Total filtration surface: 0.08 to 0.8 m².
• Filter media: cellulose and diatom filtration plates.
• Filtrate storage tank, PE, 65L.

Dim : 100 x 80 x 150 cm - 50 kg

[print-me target="#page"]

L’article Plate filter for food processing est apparu en premier sur Pignat.com.

GENERAL SPECIFICATIONS

• SS pump with EPDM flexible impeller.
• Self-priming and reversible.
• Fittings on SMS 25 end.
• Pump mounted on stainless steel cart with wheels.

Dim = 80 x 35 x 55 cm - 30 kg

[print-me target="#page"]

L’article Mobile transfert pump est apparu en premier sur Pignat.com.