Archives des ATM/3000 - Pignat.com https://pignat.com/en/product-tag/atm-3000-en/ Thu, 03 Oct 2019 11:15:41 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 https://pignat.com/wp-content/uploads/2019/01/cropped-Favicon-1-32x32.png Archives des ATM/3000 - Pignat.com https://pignat.com/en/product-tag/atm-3000-en/ 32 32 Laboratory spray dryer https://pignat.com/en/product/laboratory-spray-dryer/ Wed, 13 Mar 2019 10:09:52 +0000 http://v2.pignat.com/?post_type=product&p=18009 Study spray drying

Different components identification

Fluids circuitry comprehension

GENERAL SPECIFICATIONS

  • PE feeding beaker, 2L.
  • Peristaltic pump with variable flow rate.
  • Compressed air injection system : pressure reducing value with gauge, needle valve.
  • SS spray nozzle 0,5mm, with cleaning needle.
  • Hot air introduction system with variable flow.
  • Glass drying chamber.
  • 2 glass flasks, 500mL.
  • Glass cyclone.

Instrumentation

  • 2 temperature probes.
  • Relative humidity probe.

 

Dim: 150 x 75 x 120 cm - 170 kg
SS tubular framework 40 x 40mm

 

[print-me target="#page"]

L’article Laboratory spray dryer est apparu en premier sur Pignat.com.

]]>

Spray dryer

Spray drying is a process of productivity dry powder from a liquid or a slurry.

The liquid is sprayed in thin droplets in a nozzle and mixed with a hot air flow. It allows to evaporate the water and to generate a fine powder.

The obtained powder is carry to the cyclone who separate the air from the powder. An air filter allowed to retain the most thin particles.

 

Set parameters

Hot air temperature, maximum 200°C

Saturated solution injection rate

Injection nozzle diameter

L’article Laboratory spray dryer est apparu en premier sur Pignat.com.

]]>